CD-BCM-PLUG-EXT Extension Harness
The CD-BCM-PLUG-EXT extension harness is primarily used with Dual Intensity 3 wire LED products. A dual intensity 3 wire light will typically consist of a ground wire, a low intensity wire (running light), and a high intensity wire (Brake and/or Turn). The CD-BCM-PLUG-EXT will give you 3 output ports when connected to a MPR-BCM-PLUG allowing the use of 3 LED products to a single MPR-BCM-PLUG.
The CD-BCM-PLUG-EXT can be used with the MPR-BCM-PLUG, MPR-HD-PLUG, MPR-SS6-PLUG, MPR-SS8-PLUG and the current version of the Triple Play Module with pigtail harnesses.
Currently, the CD-BCM-PLUG-EXT would be primarily used with following products:
PB-SB-BCM
CD-SB-BCM
CD-LP-BCM
PB-FILL
CD-LATCH-BCM
CD-FASCIA-BCM
NOTE: The CD-BCM-PLUG-EXT can be used in place of a CD-TPU-EXT. However, the CD-TPU-EXT can not be used in place of a CD-BCM-PLUG-EXT as it only has 2 wires per port instead of 3.