Harley-Davidson® 2014-Current Touring models come equipped with a 6-pin Molex main wire harness connector located under the seat. The factory wires in this connector carry ground, brake, run, left turn, right turn and auxiliary power. Custom Dynamics® offers part CD-TP-QD-14 as a plug and play wire harness with one end that plugs in-line with the factory 6-pin plugs and a 34” extended wire lead with female connector. This extended lead will mate to the male OEM Harley-Davidson® Tour-Pak wire harness (69200131) to provide power to the factory Tour-Pak lighting with accessible connector for easy removal of the Tour-Pak.
2014-Current Ultra style Harley-Davidson® Tour-Pak OEM lighting will be powered by the CD-TP-QD-14 wire harness with the side arms functioning as a single intensity running light while the rear facing LED bar functions as running, brake and turn signal. In the center (narrow) section on the OEM Tour-Pak light bar (67800093) the LEDs function as dual intensity running light and brake light. The left and right (wider) sections function as dual intensity running light with either turn signal or brake/turn signal depending on how the motorcycle BCM is programmed.
In the case of adding a “chopped”, “razor”, or aftermarket Tour-Pak that is not equipped with any lighting, the CD-TP-QD-14 can still be installed under the seat of any 2014-Current Harley-Davidson® Touring model and mate with Custom Dynamics® Power Harness CD-TP-QD-14-HW to provide easy connections for powering added aftermarket Tour-Pak lighting. The Tour-Pak side of the Power Harness provides 6, 60” wire leads for hook up to ground, brake, run, left turn, right turn and auxiliary power. Turn signal power wires (brown & purple) will carry brake/turn signal power if BCM is programed for brake/turn.
Quick Disconnect solutions also offered for 2013-Earlier Harley-Davidson® Touring models with 2014-current style Harley-Davidson® Tour-Pak. Custom Dynamics® manufactures a series of hybrid Tour-Pak quick disconnects to plug into the main wire harness under the seat of your 2013-Earlier Harley-Davidson® Touring model with an extended lead to mate with the OEM 2014-Current Tour-Pak wire harness.
- CD-TP-QD-HD14 can be installed on 1997-2013 Harley-Davidson® Electra Glide, Ultra Classic, Ultra Limited models (including CVO™), Road King (FLHR), Road King Classic (FLHRC), Road Glide Ultra (FLTRU) and Road Glide Ultra CVO™ (FLTRUSE), 1997-2009 Road Glide Standard (FLTR), 2006-2009 Street Glide (FLHX) and 2010-2013 Tri Glide® to mate with 2014-current style Ultra Tour Pak® with OEM lighting and wire harness (69200131).
- CD-TP-QD-SS614 can be installed on 2010-2013 Harley-Davidson® Street Glide (FLHX) and Road Glide Custom (FLTRX) to mate with 2014-current style Ultra Tour Pak® with OEM lighting and wire harness (69200131).
At this time, Custom Dynamics® does not supply a substitute part number for the OEM Tour-Pak wire harness (69200131) or audio quick disconnect solution. New parts coming soon!