This bulletin describes how to locate the correct rear lighting harness connectors when installing a Magic Strobe, Smart Triple Play, Fillerz, Bag lights or any rear lighting on a 2014-Current Touring model. With Touring models there can be multiple 6 pin Molex (BCM) connectors. If you are having trouble with the function on your newly installed bag lights, latch lights or Fillerz, have no strobing with your Magic Strobe/ Smart Triple Play start by confirming you are connected in the proper location.
Connector 1: (Next to ECM) Rear fender harness for bikes with 1157 rear taillights or CVO panels. These models do not have a connector in location 2. 2014-Current Street Glide®, Street Glide® Special, Road Glide®, Road Glide® Special, Road King® Special , Street Glide CVO™ , Road Glide CVO™ , 2014 Road King CVO™
Harness A: Male connector inputs coming from the bike.
Harness B: Female connector outputs to the rear taillights.
Connector 2: (On rear fender) Rear Fender harness for bikes with center taillights or models with a Tour Pak. These models do have a connector in location 1, but is not for the rear fender. 2014-current Harley-Davidson® Electra Glide Ultra Classic (FLHTCU), Ultra Classic Lo (FLHTCUL), Ultra Limited (FLHTK), Ultra Limited Lo (FLHTKL), Road Glide Ultra (FLTRU), Road Glide Limited (FLTRK), 2016 Road Glide Ultra CVO™ (FLTRUSE) and 2016-current Limited CVO™ (FLHTKSE)
Harness C: Male connector inputs coming from the bike
Harness D: Female connector outputs to the rear taillights.